![]() ![]() Then click and all cameras will show up in Server List or Group List. We take Region Entrance in Front-end VCA as an example. ![]() Step1 Select Settings → System&Servers → Event Rule Settings and click Add to set a new rule Step2 Select the event which you want to trigger the recording. So you need to set it in Event Rule Settings interface. Event Record Event Record of VMS Enterprise is based on Event Rules. Step3 Click Save and you will find the checked cameras' configuration is the same as the first one.Ĥ. Step2 You can also see all cameras from different Servers or Groups by selecting Server List or Group List. ![]() Step1 Click Copy to and then check the cameras you want to copy the configuration to. Set whether to enable ANR which needs a SD card inserted in Milesight camera added via MSSPģ.3 Copy Record Schedule and Settings Both Schedule and Record Settings support copy one channel's to others'. Set maximum time for the recording to expire: Auto(delete the oldest recordings based on the disk capacity) Preset times Custom time from 1 to 365 days Set minimum time for recording to expire: Auto(delete the oldest recordings based on the disk capacity) Preset times Custom time from 1 to 365 days Set the duration of post-recording from 10s to 60s Set the duration of pre-recording from 1s to 10s Select whether the record includes audio or not Set record stream as primary, secondary or both of them Table1 Description of the settings Parameters Step3 Configure specific settings of the camera after continuous recording is enabled. Click one camera to configure this channel's record. Step4 Enable Continuous Recording and do not forget to Click Apply to save.ģ.2 Continuous Record Settings Step1 Select Settings → Devices → Camera Record Schedule → Record Settings Step2 Click Server List or Group List to show devices from different servers or groups. Click to copy one day's schedule to others'. Click one time period and then you can modify its specific time. When the time bar is blank, you can select a time period by crossing over it. Click Select All or Clear All to quickly choose or clear all times. Step3 By default, the time bars in the schedule have been all selected. Click one camera to configure this channel’s record. Continuous Recording 3.1 Enable Continuous Record Step1 Select Settings → Devices → Camera Record Schedule → Schedule Step2 Click Server List or Group List to show devices from different servers or groups. Move the mouse to the capacity bar to display more capacity information of the disk. It is recommended that the hard disk is used for storing recordings only. Select Settings→ System&Servers→ Server Settings→ Storage Management and enable one or more disks to save record. In addition to local disks, NAS external storage is also supported. Disk Settings Ensure that one or more of the server's disks are enabled and have space left before configuring record. ![]() This document will introduce how to configure and use these two functions in order to solve some doubts and problems in use. Milesight VMS Enterprise has powerful video recording and playback, which are the critical parts of the forensic process. Introduction For a VMS software, Live View, Record and Playback must be the three most important functions. Solution home FAQ Software How to Use Record and Playback in VMS Enterpriseġ. ![]()
0 Comments
Leave a Reply. |